close up of a lady adjusting the security panel
March 07, 2022

How To Reset Your Security System In Port St. Lucie

A nice benefit of getting your home security system set up by trained experts is that you rarely have to worry about it. However, there will likely be times when you must reset your alarms in Port St. Lucie. If you’re utilizing the ADT Command panel, a reset normally needs only a couple tap of a button after common events like false alarms and battery changes.

Read The Instruction Manual Before Resetting Your Alarm

Here’s a simple yet valuable tip before you start resetting your Port St. Lucie home security system, read your instruction manual prior to proceeding. You don't want to undermine your property’s defense due to pressing the wrong button. Additionally, your system may be different if you upgraded from a numerical keypad to a fully digital system. Keep in mind that if you’re unable to figure out how to reset your system, don't hesitate to call the professionals.

Resetting Your Port St. Lucie Home Security System Due To A False Alarm

Typically, a false alarm happens because of an accidentally tripped sensor. You can utilize the central hub or open the ADT mobile app and tap the shield icon and type in your security code to switch off the alarms in these situations. You may be contacted by your security monitoring team, but just tell them you experienced a false alarm.

Tips To Reset Your Alarm After A Power Outage In Port St. Lucie

When you lose power from high winds or other factors, you might begin hearing a beeping sound from your central command hub. That indicates that the alarm is being powered by the backup battery. To reset your equipment and halt the beeping, you need to take steps to disarm and rearm your security.

Keep in mind, if you lose power for prolonged time frame, you may need a full reset of your home’s security. Follow the directives in the instruction manual -- typically by putting in your PIN number and tapping the off button twice -- and you should be back to normal. You might still hear chirps from the backup power, as it might not cease until your battery reaches a full charge. Contact your security technician if you are still having issues with your ADT controls 20 hours after your power is back on.

When You Need To Reset Your Home Security System After Changing A Battery

Occasionally you need to replace a battery powering one of your security devices. In order to accomplish this, you should set your alarm system to Test Mode so you prevent setting off an alarm by accident. Once the battery is replaced, remove the alarm from Test Mode and resume normal operations. If the command center fails to recognize the component or the battery light stays on, you could require a total reset of the system.

Tips to Reset Your Port St. Lucie Security System Following The Addition Or Deletion Of A Code

The addition and deletion of personal codes can be accomplished on the ADT Command panel and the ADT Control mobile app. You should never need a reset of your alarm when deleting or adding users. With that being said, if you find yourself moving to a new house with an existing ADT alarm system, you should call your home security professional at (772) 237-3604 to establish a new contract. The technician will go on site to switch out outdated parts, place other devices (as required), and perform a full reset.

A Well-Designed Security System Is Only A Call Away

Attempting to reset a home security system in Port St. Lucie is frustrating if it fails to include understandable devices and controls. If you would like to get your easy-to-use home protection system, call (772) 237-3604 or complete the form below. We’ll be happy to customize the right security system for your property.