Categories

System glitches and false alarms can be aggravating, and more importantly, may prevent your home’s security from working how it should. Luckily, most troubles, from dead batteries to false alarms, are easy to correct. Explore our suggestions for troubleshooting your home alarm system in Port St. Lucie. We’ll help you keep your household protected and your system running properly.

Test Your Home Security System In Port St. Lucie

One sensible way to troubleshoot your property’s defense is to test it yourself! Modern systems allow you to place them in test mode to avoid initiating an emergency response from monitoring agents. Once you’re in test mode, follow these steps:

• Turn on your system as you normally would when heading out.
• Open a window or door that uses a contact sensor, or try to trigger another device. Shut the door or window once you’re done so it doesn’t trigger the alarm as you reactivate the system.
• Let the alarm resonate for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Proceed to test devices as needed
• Inspect the system activity log to validate functionality.

No need to worry, monitoring specialists will know that your alarm system is being tested. Just be sure to switch out of test mode when done. It’s a good idea to test once a month or anytime you change your home’s internet or phone connectivity.

Evaluate The Placement And Condition Of Motion Sensors

Although an integral element of your alarm system, motion sensors are well known for false alarms. Do your part to prevent them with a few straightforward troubleshooting steps.

• Conduct a visual inspection. Are there items that could move within the detection path of the sensor, like a window treatment blown in a breeze?
• Is the sensor covered in dust? Grime, dirt, and cobwebs can result in issues. Ensure the face is clean.
• Does the motion detector have pet immunity you can turn on? Some can be set to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? Low batteries can affect performance or result in false alarms.
• Is a heat source impacting the sensor? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Notifications

One helpful perk of new home security systems is that they’ll tell you when batteries are running low. If your system uses a smartphone app or control panel, you’ll often see alerts there. Depending on the alarm, you may notice an occasional beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that will have to be replaced every so often. It’s best to keep batteries on hand and create a replacement schedule. Some systems also include a rechargeable backup battery for the main control panel. This backup battery helps keep your system operating if you have a power outage and should recharge once power is back online. If it fails to recharge, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In Port St. Lucie 

As the leading name in home security, ADT builds systems that offer unsurpassed functionality and protection. Accessing test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always get updates when a sensor battery is low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your Port St. Lucie home and family. Call (772) 237-3604 or fill out our form today!